Tel: 0131 551 2931
Image not available
Image not available
Image not available

The Difference is CLEAR

Ask for the best when looking for your new or replacement windows. Check with our approved supplier list to ensure you're receiving the original and best Slimlite Ultra Clear Self Cleaning Double Glazed Units.


Introducing slimlite ultraclear

New Technology ultraclear Self-cleaning Double Glazed Units Light Transmission (Vision Clarity) 85%

The Difference is Clear.


Building Regulations

Building Regulations - Required U Values

Document L 2010 England - Effective 1st October 2010

Document 6 2010 Scotland- Effective 1st October 2010

The overall window U Value of at least 1.6 represents an insulation Value for the whole window including the frame and double glazing therefore any overall window U Value less than 1.6 is acceptable. However Building Control may allow relaxation in certain circumstances.

Listed Buildings

UC9887It should be noted that Listed Buildings are exempt from these regulations. Similarly these regulations do not apply to any windows Listed or otherwise, where the single glazing is being replaced by Slimlite Ultra or Slimlite Standard Self Cleaning, for new or replacement windows in Listed Buildings.

Slimlite Ultra clear and Slimlite Standard Self Cleaning as featured in GRAND DESIGNS with various overall thickness from 9mm to 18mm with varying U Values all UKAS Certified.

By using and maximising the latest technology it is possible to construct a double glazed unit with very small cavities or space between the glasses with a Smm perimeter seal depth and selected insulating inert gas cavity to obtain U-Values to comply with Building Regulations and comparable to U-Values obtained by standard units with much wider cavities.

Slimlite Ultra Clear and Slimlite Standard Self Cleaning Units are constructed with clear outer self cleaning pane with a selected cavity, the wider the cavity, increases the insulation, with selected cavity insulating inert gas, which only performs in small cavities, and inner pane of Low Emissivity glass. Glass thickness can be 4mm or 3mm depending on size.

The emissivity coating is on the inside face into the cavity and reflects the long wave radiation or heat back into the room. The warm edge technology perimeter spacer incorporated, ensures insignificant differential insulation value between the edge and the centre of the glass.

                    north devon logo     enviro largewhiteside logo
retroglaze logo 2Screen_Shot_2017-05-12_at_15.12.19.png